YOU ARE HERE: Skip Navigation LinksHome > Products > Donor Recognition Ideas > Donor Recognition Trees > Traditional design > Model DRT-10 Tree

Donor Recognition Tree Model DRT-10
450 Straight leaves - fixed size canopy

Donor Recognition Tree with traditional bronze trunk
Similar model shown
Trunk is the same
Canopy Shape / Size may differ


Donor recognition tree with traditional bronze trunk and fixed size canopy

This donor recognition tree model DRT-10 has a traditional bronze trunk and comes with a fixed number of leaves (450) and can not be expanded. It uses 'Straight' leaves as shown in the image.

All of our donor recognition trees are provided with the leaves attached to the clear acrylic canopy with 2 screws on each leaf. All required mounting hardware, as well as a paper mounting template, is also included. Leaves can be provided in up to 3 different colors; brass, aluminum and copper for different levels of giving. The tree canopy is manufactured from 1/4 inch thick clear acrylic sheet and, when installed, projects 1 inch from the wall.

The trunk of this traditional donor tree is 4 inch thick cast bronze and weighs about 85 pounds.

Mounting Location

This tree is for interior mounting only.


DRT-10 model: 450 Leaves
Traditional Bronze Trunk
Uses 'Straight' leaves
Special Order - Requires added time


Our Price: $CALL
You will save: At least 35%

(*) NOTE: The above picture shows the trunk for this model, with a larger canopy. The images below show the dimensions for this tree. The first image below shows the cast bronze trunk. The second image below shows the leaf used on this tree. The third image shows the outline drawing of the canopy used with this donor tree, Model DRT-10. The final fabricated product may vary slightly from the images.


Model DRT-10 donor tree traditional bronze trunk
Traditional Trunk
Model DRT-10 donor tree leaf
French curve leaf
Model DRT-10 donor tree dimensions
DRT-10 Dimensions


Large engravable 'stone' for donor trees
Engraveable 'Stone'
7-1/2" by 5"
Cast Bronze 'stone' for donor trees
Cast Bronze
'Stone' 12" by 8"
Small engravable 'stone' for donor trees
Engraveable 'Stone'
5-1/2" by 3-1/2"

See these and other accessories for this model tree.

WE DO NOT DO ENGRAVING. Engraving of leaves can be handled by most local trophy shops. Each leaf typically holds 3 lines of text. For best appearance, leaves should be engraved on a rotary engraver and anodized.