The donor trees with bronze stones that are shown on this page have either one or two, cast bronze trunks and decorative cast bronze stones that are cast integral to the model. The canopies use the same leaves and clear acrylic material as our larger traditional trunk and modern trunk models. All of the models, except for the DRT-04 have a fixed size canopy holding between 80 and 200 leaves. The model DRT-04 starts with a 125 leaf canopy and can be expanded to a total of 325 leaves.
All of our donor recognition trees are provided with the full amount of leaves attached to the clear acrylic canopy with 2 screws on each leaf. All required mounting hardware, as well as a paper mounting template, is also included. Leaves can be provided in up to 3 different colors; brass, aluminum and copper for different levels of giving. The tree canopy is manufactured from 1/4 inch thick clear acrylic sheet and, when installed, projects 1 inch from the wall. The trunk of these traditional donor trees is 4 inch thick cast bronze and weighs about 85 pounds. These trees are for interior mounting only.
THE CAST STONES ON THESE TREES ARE DECORATIVE AND CAN NOT BE ENGRAVED OR TAKE AN ENGRAVING PLATE. See the bottom of this page for additional accessories, including engraving 'stones'.
Download our Donor Tree Installation Instructions.
Engraving of leaves can be handled by most local trophy shops. Each leaf typically holds 3 lines of text. For best appearance, leaves should be engraved on a rotary engraver and anodized.